The Detroit Post
Thursday, 21 October, 2021

Is Rust Proofing Worth It Reddit

Maria Garcia
• Thursday, 29 October, 2020
• 7 min read

My colleagues are fine people but I don't really enjoy hanging out with most of them outside work. I had eventually found love and it motivated me to believe in myself and find a regular job.


I worked all through 2019 but COVID-19 happened and it was shut down and my partner of 3 years cheated and abandoned me. I'm an international student who just finished my degree, got a work visa but cannot find a job.

I've tried all kinds, from calling around to giving people my resume in person. I lost my only source of income and I don't have money to pay for my rent any more (at least I have until some time in January), which means that I don't really anywhere to go, I also don't have family here and none of my friends can really help me.

I bet you’ll have a fantastic time learning about and drinking wines from around the globe! I honestly haven’t seen anyone I know in person in almost 2 months, so it’s a hard holiday season so far.

I saw Ford's announcement about the lockdown across the province starting (conveniently) on Boxing Day through late January. It mentions that only essential businesses will stay open, but we've already seen that definition can be used loosely.

This COVID-19 and WFH situation has taken a toll on my mental and physical health. I often get urgent emails an hour before I log off that take time to complete, so I work late.

I wouldn't mind chilling in the car watching traffic drive by while I eat some fast food. When committing to such a big ticket item, it’s advisable to find ways to protect the value of your investment for as long as possible.

In addition, the cost of repairing the damage done by any corrosion that develops can really add up depending on what component(s) are affected (paint, circuits, floor panels, etc. ServiceCarSUV/Truck Rust Check$$120150Krown$$120130/$140Corrosion Free$150$170The the best way to prevent weather and salt from producing (or accelerating) corrosion on your car is to treat it with a rustproofing solution.

The process involves spraying a rustproofing product on the surface of the under body that is designed to protect it from moisture. These solutions seep into the hard-to-reach door seam, joints, and crevices that are hotspots for rust and corrosion.

A dense oil based solution can be applied to the entire body of the vehicle, including the under body. This solution involves an electronic module that sends weak electric currents through the metal of a vehicle.

This is a great short term solution, however the undercoating can chip away and cause moisture to actually seep into cracks, getting trapped under the coat and accelerating the corrosion process. The undercoating also doesn’t protect the rest of the car, and won’t be any help for areas already affected by rust or damage.

When done by a trusted professional, any holes should be drilled in unnoticeable places such as near the door latch and on the underside of the vehicle, and will be too tiny to spot. The benefits of drilling in order to apply a rustproofing solution outweigh the inconvenience of having small holes that no one will ever know are there.

Other elements such as dry weather and the UV rays from the sun can accelerate rust and corrosion once the initial damage occurs. In winter conditions, salt and other chemicals used for snow or ice removal make its way underneath your car and stick to the metal surfaces.

The combination of salt and water is more damaging than rust, as the solution eats away at the metal, weakening it and causing it to fall apart. Salt and deicing chemicals are designed to lower the freezing point of water, allowing your car to hit pavement in winter conditions.

| Reader's Digest Skip to main content Photo: Shutterstock Take yourself back a few months: you arrive at your dealership on a cold winter day to pick up the brand-new car you bought, but the manager stops you. Photo: Shutterstock One of the newest and most heavily disputed methods of rustproofing is through an electronic rust protection system.

Often sold by your dealer, an electronic module is a small device that must be professionally installed in your vehicle. These systems emit a weak current through a vehicle’s metal body, theoretically preventing it from reacting with oxygen and corroding.

Photo: Shutterstock Also known as an “undercoating,” tar-based sprays were initially introduced in the 1950s to make car rides quieter. The procedure involves spraying a black, tar-like substance on the floor pans, wheel wells, and other exposed parts of the under body of your car, which then hardens and acts as a permanent shield against moisture, salt, and other elements.

Unfortunately, over time moisture can seep behind the hard outer seal and corrode the metal beneath. Furthermore, the rigid nature of a tar based spray makes it susceptible to cracks, which will pose an entrance for water to get in.

Heart is one of the largest providers of this method of rust protection and charges approximately $150 per vehicle. Compared to its tar-based counterpart, a dripless oil spray covers more surface area because it’s applied to more interior regions of the vehicle, but this added protection comes with a price.

The application process often involves drilling holes into the frame of the vehicle to maximize the area covered. Additionally, these sprays will often leave smaller crevices and tight seams on your vehicle unprotected because of their high viscosity.

This procedure is the most common and most recommended method of rustproofing, as it’s able to fully rustproof your vehicle by penetrating all the small nooks and crannies. The biggest knock on this method is that the sprayed oil will drip off your vehicle for about two days as it dries.

To make matters even more complicated, it’s become a common practice for manufacturers to use galvanized steel in their vehicles frames. With a coating of zinc, galvanized steel doesn’t react with oxygen the way iron does greatly reduce the risk of rust.

Rustproofing will make more sense if your vehicle is regularly subjected to the elements, but if you plan to mainly do city driving in a warm climate changes are it isn’t necessary. Finally, the decisions to rustproof has to make financial sense; you wouldn’t want to spend $1,000 rustproofing a $10,000 sedan.

New-car buyers have invariably heard sales pitches for extended warranties and protection packages that have become the bread-and-butter of many dealerships. But with consumers often opting for extended-term car loans that can last up to 96 months, a small investment to keep rust away may be a worthwhile consideration.

While the CAA recommends rust protection to prolong the life of your vehicle, it prefers and endorses sprayed solutions instead of the modules. It involves spraying a black, tar-like substance on the floor pans, wheel wells, and other exposed parts of the under body of your car, which then hardens and acts as a permanent shield against moisture, salt, and other elements.

This will not protect the whole body of your car though, and it cannot stop corrosion if it has already started, which means it is best applied to brand-new vehicles. The major risk to tar-based solutions is that if not applied properly, cracks may develop in the hardened coating over time and trap moisture within itself, leading to rust.

Heart is one of the largest providers of this method of rust protection and charges approximately $150 per vehicle. Heart also offers something called Penetr-Oil, which is a very dense, wax-like oil spray applied to the entire body of the vehicle.

There is a catch though, as this method involves drilling holes into a car's doors, fenders, and other areas to make sure the substance gets applied everywhere. Another known issue is that due to the substance's high viscosity, it cannot get into all the nooks and crannies in the same way more watery oil solutions can.

As the name suggests, a slight annoyance is that the sprayed oil drips for about two days after application, potentially leaving stains in your garage, driveway or parking spot. Holes still need to be drilled in specific spots on your car to ensure the substance gets applied to all areas and annual reapplication is again recommended.

Other Articles You Might Be Interested In

01: Sj Fowler Real Estate Mesa Az
02: Aesthetic Restaurants Los Angeles
03: Wichita Area Real Estate Experts
04: Wichita Falls Real Estate For Rent
05: Wichita Real Estate Board
06: Wichita Real Estate Market Outlook
07: Wichita Real Estate News
08: Wichita Real Estate Professionals
09: Wichita State University Center For Real Estate
10: Wilkinson Era Real Estate Charlotte Nc
1 -
2 -
3 -
4 -
5 -
6 -