Place the sanded object in the center of a plastic bin that’s rested on either hard ground or a flat work surface in the garage. As it dries, the acid of the vinegar will begin to corrode the surface of the metal and you will start to see rust appear.
Pour two cups of hydrogen peroxide, four tablespoons of white vinegar, and one-and-a-half teaspoons of table salt into a plastic spray bottle. Once the salt has dissolved, spray the solution over the object to coat it partially or completely, depending on the desired effect.
Finally, spray a thin coating of clear acrylic sealer to the dry rusted object. It will set the rust and preserve the aged appearance for years to come while providing an acrylic barrier that keeps it from inadvertently staining any other metal or wood with which it comes into contact in the future.
Keep small children and pets out of the work area and chemicals out of their reach. Ever since corrugated metal has come indoors as a design element, a touch of rust may add character to the Shabby Chic style or country theme in a home.
Wear protective gloves when working with corrugated metal to avoid cuts. Fill a bucket with water and add enough liquid degreasing dishwasher detergent to create suds.
Clean the corrugated metal with the solution to remove all dirt, grease or grime. Use a wire brush that can scratch up the surface of new corrugated metal to help it rust better.
Pour a generous portion of hydrogen peroxide into the spray bottle. Spray the cleaned corrugated metal with the peroxide as it lies on a flat surface.
Sprinkle the table salt on the metal while the hydrogen peroxide is wet. Apply a sealing coat if you don't want the rust to rub off, such as a polyurethane or acrylic spray.
Spray the item with an acrylic high-gloss or matte sealer based on your preferences. As a native Californian, artist, journalist and published author, Laurie Brenner began writing professionally in 1975.
I’m using iron today because I really wanted to see if it would actually create rust. If you won’t be using patina paint on anything metal, like the cans I’m using, you don’t need the Prime Start.
Supplies Used: *Affiliate links included to help you find the products I used. Shake the patina paint and apply a coat with a new foam brush.
When you’re ready, unwrap the brush and apply a second coat of patina paint. After the rust effect was complete, I sprayed my cans with a clear sealer.
A little imagination and just a few easy steps are all it takes to create one-of-a-kind tin can planters to use alone or in groupings to complement your decor. Transform used tin cans into durable and rust -free decorative planters for indoors or out.
Choose cans that contain no rust, although a little rust can be cleaned from the tin before painting and sealing. Remove tough dirty stains or oily spots with fine-grade steel wool, if possible.
Coat the outside of each can with brush-on primer paint to create tin can planters with colorful designs or pictures. Cover the entire surface, including the bottom of the can, and all seams and rims.
Apply a second coat of primer, if needed, to keep the can protected from the elements that cause rust. Put a second coat of clear enamel over the picture for extra protection against rusting.
Disclaimer: This post may contain affiliate links, meaning, if you click through and make a purchase we may earn a commission. I don’t know about you but my heart skips a beat when I come across reclaimed wood, rusty metal, and forged iron.
There’s something to be said about pieces that speak their history through their old age and rusty patina, and it’s one of the reasons I’m so drawn to mountain homes and log cabins. There’s a project we’ve had in mind for our RV, all we needed was some antique horseshoes.
I have to tell ya, making metal rust in fast-forward was even more fun than I anticipated. I originally came across this post on how to make metal rust and planned to follow it to a tee, but then I became all impatient and excited and just did my own thing.
After I placed my horseshoe in the container I poured some white distilled vinegar on top. I didn’t measure but I poured just enough so that it covered the horseshoe and then I sorta swished it around on top.
At this point, you’ll want to add peroxide on top of your metal objects. I then sprinkled …err dumped… a bunch of salt on my horseshoe and the rusty color started to come out even more.
Then I called Eric over because I was all excited to show him, but I wanted more bubbles and fizz, so I poured a bit more hydrogen peroxide on top. After a few minutes, I swished the horseshoe around in the solution to sort of rinse off the salt and then patted it dry with a paper towel.
You’ll want to add a clear sealer to prevent the rusty patina from flaking off and staining anything they touch. When I did seal them I just used some leftover Spar Urethane and a foam brush, but you can use any clear sealer and may prefer a spray-on kind.
And if you have a specific technique that you prefer when it comes to making new metal look old, we would love to hear about that too! After receiving a lot of comments and emails about this not working on certain objects I wanted to add that not all metals will rust.
I believe it has to have iron in it in order to rust, and if it’s galvanized, stainless steel or some other type of metal that doesn’t corrode then this process won’t work. I learned this the hard way by trying to rust some galvanized buckets I had on hand and read up about it here.
If you watch the video at the top of this post you’ll see the difference in the spray vs. dunk method. Basically, the spray method will allow more of the contrast of the original metal to show through and it is easier to work in layers and add more rust if you want.
Years ago, everything from tea and tobacco to crackers and candies came packaged in metal boxes, usually made from tin. The exteriors of these tins were decorated with company logos, artwork and graphics -- designs that make them especially appealing to collectors.
Unless the metal constituting a decorative tin is galvanized, it can easily play host to blooms of rust, which can spread and corrode your collectible before you know it. John Singer, a chemist in New London, N.H., says the best way to stave off rust is to apply a coat of clear lacquer inside and outside the tin.
It's important to do a test before applying the lacquer, as there's a risk that it can act as a solvent, damaging the ink in the designs. Find an unobtrusive spot on the tin, and dab a tiny bit of the lacquer there to see if the ink dissolves.
When the weather is warm, run it on the normal, or “forward” setting (counterclockwise), which propels air downward and creates a refreshing breeze that can make a room's temperature seem up to 8 degrees cooler. During the winter, reverse the fan's direction so the blades rotate clockwise, and operate it at a slow speed.