One of the best ways to protect your vehicle and ensure you maintain its market value is to apply a rust proofing solution. The process involves spraying a rust proofing product on the surface of the under body that is designed to protect it from moisture.
These solutions seep into the hard-to-reach door seam, joints, and crevices that are hotspots for rust and corrosion. Small holes need to be drilled in order for the product to reach certain areas of the car (more about this later), and an annual application is typically recommended.
This solution involves an electronic module that sends weak electric currents through the metal of a vehicle. This is a great short term solution, however the undercoating can chip away and cause moisture to actually seep into cracks, getting trapped under the coat and accelerating the corrosion process.
The undercoating also doesn’t protect the rest of the car, and won’t be any help for areas already affected by rust or damage. When done by a trusted professional, any holes should be drilled in unnoticeable places such as near the door latch and on the underside of the vehicle, and will be too tiny to spot.
The benefits of drilling in order to apply a rust proofing solution outweigh the inconvenience of having small holes that no one will ever know are there. Other elements such as dry weather and the UV rays from the sun can accelerate rust and corrosion once the initial damage occurs.
In winter conditions, salt and other chemicals used for snow or ice removal make its way underneath your car and stick to the metal surfaces. The combination of salt and water is more damaging than rust, as the solution eats away at the metal, weakening it and causing it to fall apart.
Salt and deicing chemicals are designed to lower the freezing point of water, allowing your car to hit pavement in winter conditions. Your vehicle has a lot of moving parts, and over time the metal components eventually show the effects of wear and tear.
Exhaust and Muffler System Coil Springs Floor Panels Frame and Sub-frame Chip Paint Brakes Door Hinges Electric Circuits Rust proofing and undercoating are excellent examples of an automotive service that’s not usually heard of but is essential for better safety and protection.
But, if you want to practice excellent car care and ensure that you can make the most out of your ride by giving it the best love possible, auto rustproofing is a procedure you would have to do. The first thing you need to understand is that rust forms on your car the moment you drive it out of the dealership.
Since you drive your car in an environment that’s already full of these elements, it is inevitable that your ride will accumulate rust. The great news is that the global auto industry has already created automotive technology that can give your auto a good quality barrier through products like rust inhibitors and rust converters.
Brands like Rust Check are already well-known because they use quality chemicals to give optimum performance. This is made harder by the fact that not many people know the difference between rust proofing vs. undercoating.
Contrary to popular belief, they aren’t synonymous and you can save a lot of time by learning how they’re both different! But you must not forget the interior surfaces of your car’s hood and doors since rust can oxidize from there as well.
You must know its main function to fully understand and appreciate why undercoating is still needed by your car. Undercoating is the sprayed application of a wax or rubber-based composite onto the entire underside of the vehicle.
It’s designed to create a rust -proof layer between the underside of the vehicle and the water, ice, and salt of the road. Give it a year tops and you should probably remove your old undercoating and apply a fresh new layer.
Even if your car’s underside isn’t actually visible, it’s still very susceptible to damage when you go out driving. Applying an undercoat to a vehicle plus curing time usually only takes a single day, so long as sufficient time is given for the applied coating to fully dry and adhere to the vehicle.
Mud, dirt, debris, rainwater among many other pollutants can cause you problems in the long run. By applying undercoating, you’ll get maximum rust protection and you wouldn’t have to worry about a while.
Therefore, combining the undercoating or rustproofing could provide the best of both worlds of rust protection for your vehicles. Also, it’s highly recommended doing an undercoating if your driving commute involves a lot of distances over salt-soaked highways as salt increases the speed of corrosion.
This isotropic liquid is made from wool-wax, refined petroleum oils, and other special agents that can help control corrosion. It does this by penetrating hard to reach parts of your ride up to its metal’s base.
Its coat protects your vehicle’s paint as well as prevents rust from forming. This heavy duty and high performing product can also be used in other equipment, be it industrial, marine, or in the home.
You can also check out other brands like Rust coleus and Restore since they make quality products as well. The spray type is convenient and provides a quick fix on the spot.
CONDITIONS Leather, VINYL & WOOD FLUID FILM WILL NOT BURN GREENERY WHEN USED... WILL NOT FREEZE, GREAT FOR BATTERY TERMINALS, ... As far as any under body rust protection spray goes, the advanced isotropic formula of this brand performs amazingly.
Net Aerosol Can Easily applied, just brush or spray it on Destroys rust on all automotive applications Within minutes, rust disappears and a durable... Tough coating serves as an excellent... What’s more amazing is that it creates an excellent black polymer coating that protects your undercarriage perfectly.
The advanced formula in this product is specially created for fiberglass and body fillers. This product from a reputable brand like 3M works amazingly at preventing corrosion and abrasion from damaging your underside.
It also protects an additional barrier from road debris to lessen the damage done when driving. Plus, the matte black finish helps hide welding marks and other repairs done on your undercarriage.
This product also has sound deadening properties that can help reduce road noise when driving. Heart International Corporation is one of the very first companies to introduce rust proofing to the world.
In fact, they have a very long and rich history already and can be considered pioneers and experts in rust proofing. Although many people considered their innovative product to be a hoax at first, the quality and performance were undeniable.
With all the success they’ve garnered throughout the years, you can say that Heart rust protection is definitely one of the best. Another great company to look into when searching for excellent rust proofing and undercoating shops is Known (see this post for a mother that talks highly about this brand).
Their amazing products are highly innovative and this company continually gives importance to research and development so you know you’re getting only the best and most recent technology there is. This company is also known for its Known rustproofing warranty, a testimony that they also care what their customers think.
Well, to give you a ball-park estimate, a typical rust proofing service will be available for about $125 to $200. The reason for this is that most parts of your undercarriage are made of galvanized steel coated with zinc.
But the keyword there is “less likely.” There are instances that the zinc can get chipped off and then your ride will be left unprotected. This tar act as a barrier to guard against moisture, salt, and other substances that can cause rust.
Though you can purchase off the shelf undercoating and rust proofing spray and DIY but getting a professional to do is better to ensure it’s done properly. Electronic method Using a weak electric current, this small device can stop the corroding effects of rust.
So far, the electronic method does work for water automobiles but for land vehicle, it still remains uncertain. Dripless oil spray A wax-like substance applied to the entire body of the vehicle, it hardens once it has dried.
After removing any rust, it is time to prime and paint the underside of the vehicle. The last step in the process requires you to apply an undercoating to the under body of your vehicle.